Use variable for sequential ratio [skip ci]

Previously, the cost estimation formula for a HNSW index scan utilized
a methodology that only factored in the entry level for an HNSW scan
and the "m" index parameter, which reflects the number of tuples (or
vectors) to scan at each step of a HNSW graph traversal. While this
would bias the PostgreSQL query planner to choose an HNSW index scan
over other available paths, this could lead to potential suboptimal
index selection, for example, choosing to use a HNSW index instead of
an available B-tree index that has better selectivity.

The number of tuples scanned during HNSW graph traversal is principally
influenced by these factors:

 * The number of tuples stored in the index
 * `m` - the number of tuples that are scanned in each step of the graph
   traversal
 * `hnsw.ef_search` - which influences the total number of steps it
   takes for the scan to converge on the approximated nearest neighbors

Through testing different source models for vectors, we also observed
that the correlation of vectors in mdoels would impact this convergence.
For this first iteration, we've opted to hardcode a constant scaling
factor and set it to `0.55`, though a future commit may turn this into
a configurable parameter.

The high-level formula for estimating the cost of a HNSW index scan is
as such:

```
(entryLevel * m) + (layer0TuplesMax * layer0Selectivity)
```

where

- `(entryLevel * m)` is the lower bound of tuples to scan, as it
accounts for the graph traversal to layer 0 (L0). (L1 and above has an ef=1)
- `layer0TuplesMax` is an estimate of the maximum number of tuples to
scan at L0. This accounts for tuples that may end up being discarded due
to them already being visited. Testing shows that the number of steps
until converge is similar to the value of `hnsw.ef_search`, thus we can
estimate tuples max at `hnsw.ef_search * m * 2`
- `layer0Selectivity` - estimates the percentage of tuples that will
actually be scanned during the index traversal, multipled by the scaling
factor

In addition to the `m` build parameter and `hsnw.ef_search`, costs
estimates can be influenced by standard PostgreSQL costing parameters,
though adjusting those (e.g. `random_page_cost`) should be done with
care.

Co-authored-by: @ankane

CHANGELOG.md

@@ -1,6 +1,7 @@
 ## 0.8.0 (unreleased)
 
 - Added casts for arrays to `sparsevec`
+- Improved cost estimation
 - Reduced memory usage for HNSW index scans
 - Dropped support for Postgres 12
 

Dockerfile

@@ -1,4 +1,4 @@
-ARG PG_MAJOR=16
+ARG PG_MAJOR=17
 FROM postgres:$PG_MAJOR
 ARG PG_MAJOR
 

Makefile

@@ -66,7 +66,7 @@ dist:
 	git archive --format zip --prefix=$(EXTENSION)-$(EXTVERSION)/ --output dist/$(EXTENSION)-$(EXTVERSION).zip master
 
 # for Docker
-PG_MAJOR ?= 16
+PG_MAJOR ?= 17
 
 .PHONY: docker
 

README.md

@@ -52,6 +52,8 @@ nmake /F Makefile.win
 nmake /F Makefile.win install
 ```
 
+Note: Postgres 17 is not supported yet due to an upstream issue
+
 See the [installation notes](#installation-notes---windows) if you run into issues
 
 You can also install it with [Docker](#docker) or [conda-forge](#conda-forge).
@@ -100,6 +102,8 @@ Or add a vector column to an existing table
 ALTER TABLE items ADD COLUMN embedding vector(3);
 ```
 
+Also supports [half-precision](#half-precision-vectors), [binary](#binary-vectors), and [sparse](#sparse-vectors) vectors
+
 Insert vectors
 
 ```sql
@@ -145,6 +149,8 @@ Supported distance functions are:
 - `<#>` - (negative) inner product
 - `<=>` - cosine distance
 - `<+>` - L1 distance (added in 0.7.0)
+- `<~>` - Hamming distance (binary vectors, added in 0.7.0)
+- `<%>` - Jaccard distance (binary vectors, added in 0.7.0)
 
 Get the nearest neighbors to a row
 
@@ -983,7 +989,7 @@ l2_normalize(sparsevec) → sparsevec | Normalize with Euclidean norm | 0.7.0
 If your machine has multiple Postgres installations, specify the path to [pg_config](https://www.postgresql.org/docs/current/app-pgconfig.html) with:
 
 ```sh
-export PG_CONFIG=/Library/PostgreSQL/16/bin/pg_config
+export PG_CONFIG=/Library/PostgreSQL/17/bin/pg_config
 ```
 
 Then re-run the installation instructions (run `make clean` before `make` if needed). If `sudo` is needed for `make install`, use:
@@ -994,11 +1000,11 @@ sudo --preserve-env=PG_CONFIG make install
 
 A few common paths on Mac are:
 
-- EDB installer - `/Library/PostgreSQL/16/bin/pg_config`
-- Homebrew (arm64) - `/opt/homebrew/opt/postgresql@16/bin/pg_config`
-- Homebrew (x86-64) - `/usr/local/opt/postgresql@16/bin/pg_config`
+- EDB installer - `/Library/PostgreSQL/17/bin/pg_config`
+- Homebrew (arm64) - `/opt/homebrew/opt/postgresql@17/bin/pg_config`
+- Homebrew (x86-64) - `/usr/local/opt/postgresql@17/bin/pg_config`
 
-Note: Replace `16` with your Postgres server version
+Note: Replace `17` with your Postgres server version
 
 ### Missing Header
 
@@ -1007,10 +1013,10 @@ If compilation fails with `fatal error: postgres.h: No such file or directory`,
 For Ubuntu and Debian, use:
 
 ```sh
-sudo apt install postgresql-server-dev-16
+sudo apt install postgresql-server-dev-17
 ```
 
-Note: Replace `16` with your Postgres server version
+Note: Replace `17` with your Postgres server version
 
 ### Missing SDK
 
@@ -1043,17 +1049,17 @@ If installation fails with `Access is denied`, re-run the installation instructi
 Get the [Docker image](https://hub.docker.com/r/pgvector/pgvector) with:
 
 ```sh
-docker pull pgvector/pgvector:pg16
+docker pull pgvector/pgvector:pg17
 ```
 
-This adds pgvector to the [Postgres image](https://hub.docker.com/_/postgres) (replace `16` with your Postgres server version, and run it the same way).
+This adds pgvector to the [Postgres image](https://hub.docker.com/_/postgres) (replace `17` with your Postgres server version, and run it the same way).
 
 You can also build the image manually:
 
 ```sh
 git clone --branch v0.7.4 https://github.com/pgvector/pgvector.git
 cd pgvector
-docker build --pull --build-arg PG_MAJOR=16 -t myuser/pgvector .
+docker build --pull --build-arg PG_MAJOR=17 -t myuser/pgvector .
 ```
 
 ### Homebrew
@@ -1064,7 +1070,7 @@ With Homebrew Postgres, you can use:
 brew install pgvector
 ```
 
-Note: This only adds it to the `postgresql@14` formula
+Note: This only adds it to the `postgresql@17` and `postgresql@14` formulas
 
 ### PGXN
 
@@ -1079,22 +1085,22 @@ pgxn install vector
 Debian and Ubuntu packages are available from the [PostgreSQL APT Repository](https://wiki.postgresql.org/wiki/Apt). Follow the [setup instructions](https://wiki.postgresql.org/wiki/Apt#Quickstart) and run:
 
 ```sh
-sudo apt install postgresql-16-pgvector
+sudo apt install postgresql-17-pgvector
 ```
 
-Note: Replace `16` with your Postgres server version
+Note: Replace `17` with your Postgres server version
 
 ### Yum
 
 RPM packages are available from the [PostgreSQL Yum Repository](https://yum.postgresql.org/). Follow the [setup instructions](https://www.postgresql.org/download/linux/redhat/) for your distribution and run:
 
 ```sh
-sudo yum install pgvector_16
+sudo yum install pgvector_17
 # or
-sudo dnf install pgvector_16
+sudo dnf install pgvector_17
 ```
 
-Note: Replace `16` with your Postgres server version
+Note: Replace `17` with your Postgres server version
 
 ### pkg
 

src/halfvec.c

@@ -159,24 +159,6 @@ CheckStateArray(ArrayType *statearray, const char *caller)
 	return (float8 *) ARR_DATA_PTR(statearray);
 }
 
-#if PG_VERSION_NUM < 120003
-static pg_noinline void
-float_overflow_error(void)
-{
-	ereport(ERROR,
-			(errcode(ERRCODE_NUMERIC_VALUE_OUT_OF_RANGE),
-			 errmsg("value out of range: overflow")));
-}
-
-static pg_noinline void
-float_underflow_error(void)
-{
-	ereport(ERROR,
-			(errcode(ERRCODE_NUMERIC_VALUE_OUT_OF_RANGE),
-			 errmsg("value out of range: underflow")));
-}
-#endif
-
 /*
  * Convert textual representation to internal representation
  */

src/hnsw.c

@@ -12,6 +12,7 @@
 #include "utils/float.h"
 #include "utils/guc.h"
 #include "utils/selfuncs.h"
+#include "utils/spccache.h"
 
 #if PG_VERSION_NUM < 150000
 #define MarkGUCPrefixReserved(x) EmitWarningsOnPlaceholders(x)
@@ -99,7 +100,9 @@ hnswcostestimate(PlannerInfo *root, IndexPath *path, double loop_count,
 {
 	GenericCosts costs;
 	int			m;
-	int			entryLevel;
+	double		ratio;
+	double		startupPages;
+	double		spc_seq_page_cost;
 	Relation	index;
 
 	/* Never use index without order */
@@ -115,21 +118,71 @@ hnswcostestimate(PlannerInfo *root, IndexPath *path, double loop_count,
 
 	MemSet(&costs, 0, sizeof(costs));
 
+	genericcostestimate(root, path, loop_count, &costs);
+
 	index = index_open(path->indexinfo->indexoid, NoLock);
 	HnswGetMetaPageInfo(index, &m, NULL);
 	index_close(index, NoLock);
 
-	/* Approximate entry level */
-	entryLevel = (int) -log(1.0 / path->indexinfo->tuples) * HnswGetMl(m);
+	/*
+	 * HNSW cost estimation follows a formula that accounts for the total
+	 * number of tuples indexed combined with the parameters that most
+	 * influence the duration of the index scan, namely: m - the number of
+	 * tuples that are scanned in each step of the HNSW graph traversal
+	 * ef_search - which influences the total number of steps taken at layer 0
+	 *
+	 * The source of the vector data can impact how many steps it takes to
+	 * converge on the set of vectors to return to the executor. Currently, we
+	 * use a hardcoded scaling factor (HNSWScanScalingFactor) to help
+	 * influence that, but this could later become a configurable parameter
+	 * based on the cost estimations.
+	 *
+	 * The tuple estimator formula is below:
+	 *
+	 * numIndexTuples = entryLevel * m + layer0TuplesMax * layer0Selectivity
+	 *
+	 * "entryLevel * m" represents the floor of tuples we need to scan to get
+	 * to layer 0 (L0).
+	 *
+	 * "layer0TuplesMax" is the estimated total number of tuples we'd scan at
+	 * L0 if we weren't discarding already visited tuples as part of the scan.
+	 *
+	 * "layer0Selectivity" estimates the percentage of tuples that are scanned
+	 * at L0, accounting for previously visited tuples, multiplied by the
+	 * "scalingFactor" (currently hardcoded).
+	 */
+	if (path->indexinfo->tuples > 0)
+	{
+		double		scalingFactor = 0.55;
+		int			entryLevel = (int) (log(path->indexinfo->tuples) * HnswGetMl(m));
+		int			layer0TuplesMax = HnswGetLayerM(m, 0) * hnsw_ef_search;
+		double		layer0Selectivity = scalingFactor * log(path->indexinfo->tuples) / (log(m) * (1 + log(hnsw_ef_search)));
 
-	/* TODO Improve estimate of visited tuples (currently underestimates) */
-	/* Account for number of tuples (or entry level), m, and ef_search */
-	costs.numIndexTuples = (entryLevel + 2) * m;
+		ratio = (entryLevel * m + layer0TuplesMax * layer0Selectivity) / path->indexinfo->tuples;
 
-	genericcostestimate(root, path, loop_count, &costs);
+		if (ratio > 1)
+			ratio = 1;
+	}
+	else
+		ratio = 1;
 
-	/* Use total cost since most work happens before first tuple is returned */
-	*indexStartupCost = costs.indexTotalCost;
+	get_tablespace_page_costs(path->indexinfo->reltablespace, NULL, &spc_seq_page_cost);
+
+	/* Startup cost is cost before returning the first row */
+	costs.indexStartupCost = costs.indexTotalCost * ratio;
+
+	/* Adjust cost if needed since TOAST not included in seq scan cost */
+	startupPages = costs.numIndexPages * ratio;
+	if (startupPages > path->indexinfo->rel->pages && ratio < 0.5)
+	{
+		/* Change all page cost from random to sequential */
+		costs.indexStartupCost -= startupPages * (costs.spc_random_page_cost - spc_seq_page_cost);
+
+		/* Remove cost of extra pages */
+		costs.indexStartupCost -= (startupPages - path->indexinfo->rel->pages) * spc_seq_page_cost;
+	}
+
+	*indexStartupCost = costs.indexStartupCost;
 	*indexTotalCost = costs.indexTotalCost;
 	*indexSelectivity = costs.indexSelectivity;
 	*indexCorrelation = costs.indexCorrelation;

src/hnswutils.c

@@ -759,9 +759,16 @@ HnswLoadUnvisitedFromDisk(HnswElement element, HnswUnvisited * unvisited, int *u
 	page = BufferGetPage(buf);
 
 	ntup = (HnswNeighborTuple) PageGetItem(page, PageGetItemId(page, element->neighborOffno));
-	start = (element->level - lc) * m;
+
+	/* Ensure expected neighbors */
+	if (ntup->count != (element->level + 2) * m)
+	{
+		UnlockReleaseBuffer(buf);
+		return;
+	}
 
 	/* Copy to minimize lock time */
+	start = (element->level - lc) * m;
 	memcpy(&indextids, ntup->indextids + start, lm * sizeof(ItemPointerData));
 
 	UnlockReleaseBuffer(buf);

src/ivfflat.c

@@ -17,8 +17,6 @@
 #endif
 
 int			ivfflat_probes;
-int			ivfflat_max_probes;
-bool		ivfflat_streaming;
 static relopt_kind ivfflat_relopt_kind;
 
 /*
@@ -35,14 +33,6 @@ IvfflatInit(void)
 							"Valid range is 1..lists.", &ivfflat_probes,
 							IVFFLAT_DEFAULT_PROBES, IVFFLAT_MIN_LISTS, IVFFLAT_MAX_LISTS, PGC_USERSET, 0, NULL, NULL, NULL);
 
-	DefineCustomIntVariable("ivfflat.max_probes", "Sets the max number of probes for iterative scans",
-							NULL, &ivfflat_max_probes,
-							-1, IVFFLAT_MIN_LISTS, IVFFLAT_MAX_LISTS, PGC_USERSET, 0, NULL, NULL, NULL);
-
-	DefineCustomBoolVariable("ivfflat.streaming", "Use streaming mode",
-							 NULL, &ivfflat_streaming,
-							 IVFFLAT_DEFAULT_STREAMING, PGC_USERSET, 0, NULL, NULL, NULL);
-
 	MarkGUCPrefixReserved("ivfflat");
 }
 
@@ -67,35 +57,6 @@ ivfflatbuildphasename(int64 phasenum)
 	}
 }
 
-/*
- * Estimate the number of probes for iterative scans
- */
-static int
-EstimateProbes(PlannerInfo *root, IndexPath *path, int lists)
-{
-	double		selectivity = 1;
-	ListCell   *lc;
-	double		tuplesPerList;
-
-	/* Cannot estimate without limit */
-	/* limit_tuples includes offset */
-	if (root->limit_tuples < 0)
-		return 0;
-
-	/* Get the selectivity of non-index conditions */
-	foreach(lc, path->indexinfo->indrestrictinfo)
-	{
-		RestrictInfo *rinfo = lfirst(lc);
-
-		/* Skip DEFAULT_INEQ_SEL since it may be a distance filter */
-		if (rinfo->norm_selec >= 0 && rinfo->norm_selec <= 1 && rinfo->norm_selec != (Selectivity) DEFAULT_INEQ_SEL)
-			selectivity *= rinfo->norm_selec;
-	}
-
-	tuplesPerList = path->indexinfo->tuples / (double) lists;
-	return root->limit_tuples / (tuplesPerList * selectivity);
-}
-
 /*
  * Estimate the cost of an index scan
  */
@@ -107,8 +68,9 @@ ivfflatcostestimate(PlannerInfo *root, IndexPath *path, double loop_count,
 {
 	GenericCosts costs;
 	int			lists;
-	int			probes;
 	double		ratio;
+	double		sequentialRatio = 0.5;
+	double		startupPages;
 	double		spc_seq_page_cost;
 	Relation	index;
 
@@ -125,59 +87,37 @@ ivfflatcostestimate(PlannerInfo *root, IndexPath *path, double loop_count,
 
 	MemSet(&costs, 0, sizeof(costs));
 
+	genericcostestimate(root, path, loop_count, &costs);
+
 	index = index_open(path->indexinfo->indexoid, NoLock);
 	IvfflatGetMetaPageInfo(index, &lists, NULL);
 	index_close(index, NoLock);
 
-	probes = ivfflat_probes;
-	if (ivfflat_streaming)
-	{
-		probes = Max(probes, EstimateProbes(root, path, lists));
-
-		if (ivfflat_max_probes != -1)
-			probes = Min(probes, ivfflat_max_probes);
-	}
-
 	/* Get the ratio of lists that we need to visit */
-	ratio = ((double) probes) / lists;
+	ratio = ((double) ivfflat_probes) / lists;
 	if (ratio > 1.0)
 		ratio = 1.0;
 
-	/*
-	 * This gives us the subset of tuples to visit. This value is passed into
-	 * the generic cost estimator to determine the number of pages to visit
-	 * during the index scan.
-	 */
-	costs.numIndexTuples = path->indexinfo->tuples * ratio;
-
-	genericcostestimate(root, path, loop_count, &costs);
-
 	get_tablespace_page_costs(path->indexinfo->reltablespace, NULL, &spc_seq_page_cost);
 
+	/* Change some page cost from random to sequential */
+	costs.indexTotalCost -= sequentialRatio * costs.numIndexPages * (costs.spc_random_page_cost - spc_seq_page_cost);
+
+	/* Startup cost is cost before returning the first row */
+	costs.indexStartupCost = costs.indexTotalCost * ratio;
+
 	/* Adjust cost if needed since TOAST not included in seq scan cost */
-	if (costs.numIndexPages > path->indexinfo->rel->pages && ratio < 0.5)
+	startupPages = costs.numIndexPages * ratio;
+	if (startupPages > path->indexinfo->rel->pages && ratio < 0.5)
 	{
-		/* Change all page cost from random to sequential */
-		costs.indexTotalCost -= costs.numIndexPages * (costs.spc_random_page_cost - spc_seq_page_cost);
+		/* Change rest of page cost from random to sequential */
+		costs.indexStartupCost -= (1 - sequentialRatio) * startupPages * (costs.spc_random_page_cost - spc_seq_page_cost);
 
 		/* Remove cost of extra pages */
-		costs.indexTotalCost -= (costs.numIndexPages - path->indexinfo->rel->pages) * spc_seq_page_cost;
-	}
-	else
-	{
-		/* Change some page cost from random to sequential */
-		costs.indexTotalCost -= 0.5 * costs.numIndexPages * (costs.spc_random_page_cost - spc_seq_page_cost);
+		costs.indexStartupCost -= (startupPages - path->indexinfo->rel->pages) * spc_seq_page_cost;
 	}
 
-	/*
-	 * If the list selectivity is lower than what is returned from the generic
-	 * cost estimator, use that.
-	 */
-	if (ratio < costs.indexSelectivity)
-		costs.indexSelectivity = ratio;
-
-	/* Use total cost since most work happens before first tuple is returned */
-	*indexStartupCost = costs.indexTotalCost;
+	*indexStartupCost = costs.indexStartupCost;
 	*indexTotalCost = costs.indexTotalCost;
 	*indexSelectivity = costs.indexSelectivity;
 	*indexCorrelation = costs.indexCorrelation;

src/ivfflat.h

@@ -43,7 +43,6 @@
 #define IVFFLAT_MIN_LISTS		1
 #define IVFFLAT_MAX_LISTS		32768
 #define IVFFLAT_DEFAULT_PROBES	1
-#define IVFFLAT_DEFAULT_STREAMING	false
 
 /* Build phases */
 /* PROGRESS_CREATEIDX_SUBPHASE_INITIALIZE is 1 */
@@ -81,8 +80,6 @@
 
 /* Variables */
 extern int	ivfflat_probes;
-extern int	ivfflat_max_probes;
-extern bool ivfflat_streaming;
 
 typedef struct VectorArrayData
 {
@@ -250,10 +247,8 @@ typedef struct IvfflatScanOpaqueData
 {
 	const		IvfflatTypeInfo *typeInfo;
 	int			probes;
-	int			maxProbes;
 	int			dimensions;
 	bool		first;
-	Datum		value;
 
 	/* Sorting */
 	Tuplesortstate *sortstate;
@@ -270,8 +265,6 @@ typedef struct IvfflatScanOpaqueData
 
 	/* Lists */
 	pairingheap *listQueue;
-	BlockNumber *startPages;
-	int			currentIndex;
 	IvfflatScanList lists[FLEXIBLE_ARRAY_MEMBER];	/* must come last */
 }			IvfflatScanOpaqueData;
 

src/ivfscan.c

@@ -65,7 +65,7 @@ GetScanLists(IndexScanDesc scan, Datum value)
 			/* Use procinfo from the index instead of scan key for performance */
 			distance = DatumGetFloat8(so->distfunc(so->procinfo, so->collation, PointerGetDatum(&list->center), value));
 
-			if (listCount < so->maxProbes)
+			if (listCount < so->probes)
 			{
 				IvfflatScanList *scanlist;
 
@@ -102,11 +102,6 @@ GetScanLists(IndexScanDesc scan, Datum value)
 
 		UnlockReleaseBuffer(cbuf);
 	}
-
-	for (int i = listCount - 1; i >= 0; i--)
-		so->startPages[i] = GetScanList(pairingheap_remove_first(so->listQueue))->startPage;
-
-	Assert(pairingheap_is_empty(so->listQueue));
 }
 
 /*
@@ -119,14 +114,11 @@ GetScanItems(IndexScanDesc scan, Datum value)
 	TupleDesc	tupdesc = RelationGetDescr(scan->indexRelation);
 	double		tuples = 0;
 	TupleTableSlot *slot = so->vslot;
-	int			batchProbes = 0;
-
-	tuplesort_reset(so->sortstate);
 
 	/* Search closest probes lists */
-	while (so->currentIndex < so->maxProbes && (++batchProbes) <= so->probes)
+	while (!pairingheap_is_empty(so->listQueue))
 	{
-		BlockNumber searchPage = so->startPages[so->currentIndex++];
+		BlockNumber searchPage = GetScanList(pairingheap_remove_first(so->listQueue))->startPage;
 
 		/* Search all entry pages for list */
 		while (BlockNumberIsValid(searchPage))
@@ -174,17 +166,13 @@ GetScanItems(IndexScanDesc scan, Datum value)
 		}
 	}
 
-	if (tuples < 100 && !ivfflat_streaming)
+	if (tuples < 100)
 		ereport(DEBUG1,
 				(errmsg("index scan found few tuples"),
 				 errdetail("Index may have been created with little data."),
 				 errhint("Recreate the index and possibly decrease lists.")));
 
 	tuplesort_performsort(so->sortstate);
-
-#if defined(IVFFLAT_MEMORY)
-	elog(INFO, "memory: %zu MB", MemoryContextMemAllocated(CurrentMemoryContext, true) / (1024 * 1024));
-#endif
 }
 
 /*
@@ -252,7 +240,6 @@ ivfflatbeginscan(Relation index, int nkeys, int norderbys)
 	int			lists;
 	int			dimensions;
 	int			probes = ivfflat_probes;
-	int			maxProbes;
 
 	scan = RelationGetIndexScan(index, nkeys, norderbys);
 
@@ -262,21 +249,10 @@ ivfflatbeginscan(Relation index, int nkeys, int norderbys)
 	if (probes > lists)
 		probes = lists;
 
-	if (ivfflat_streaming)
-	{
-		if (ivfflat_max_probes == -1)
-			maxProbes = lists;
-		else
-			maxProbes = Min(ivfflat_max_probes, lists);
-	}
-	else
-		maxProbes = probes;
-
-	so = (IvfflatScanOpaque) palloc(offsetof(IvfflatScanOpaqueData, lists) + maxProbes * sizeof(IvfflatScanList));
+	so = (IvfflatScanOpaque) palloc(offsetof(IvfflatScanOpaqueData, lists) + probes * sizeof(IvfflatScanList));
 	so->typeInfo = IvfflatGetTypeInfo(index);
 	so->first = true;
 	so->probes = probes;
-	so->maxProbes = maxProbes;
 	so->dimensions = dimensions;
 
 	/* Set support functions */
@@ -304,8 +280,6 @@ ivfflatbeginscan(Relation index, int nkeys, int norderbys)
 	so->bas = GetAccessStrategy(BAS_BULKREAD);
 
 	so->listQueue = pairingheap_allocate(CompareLists, scan);
-	so->startPages = palloc(maxProbes * sizeof(BlockNumber));
-	so->currentIndex = 0;
 
 	scan->opaque = so;
 
@@ -320,9 +294,11 @@ ivfflatrescan(IndexScanDesc scan, ScanKey keys, int nkeys, ScanKey orderbys, int
 {
 	IvfflatScanOpaque so = (IvfflatScanOpaque) scan->opaque;
 
+	if (!so->first)
+		tuplesort_reset(so->sortstate);
+
 	so->first = true;
 	pairingheap_reset(so->listQueue);
-	so->currentIndex = 0;
 
 	if (keys && scan->numberOfKeys > 0)
 		memmove(scan->keyData, keys, scan->numberOfKeys * sizeof(ScanKeyData));
@@ -338,8 +314,6 @@ bool
 ivfflatgettuple(IndexScanDesc scan, ScanDirection dir)
 {
 	IvfflatScanOpaque so = (IvfflatScanOpaque) scan->opaque;
-	ItemPointer heaptid;
-	bool		isnull;
 
 	/*
 	 * Index can be used to scan backward, but Postgres doesn't support
@@ -367,25 +341,28 @@ ivfflatgettuple(IndexScanDesc scan, ScanDirection dir)
 		IvfflatBench("GetScanLists", GetScanLists(scan, value));
 		IvfflatBench("GetScanItems", GetScanItems(scan, value));
 		so->first = false;
-		so->value = value;
 
-		/* TODO clean up if we allocated a new value */
+#if defined(IVFFLAT_MEMORY)
+		elog(INFO, "memory: %zu MB", MemoryContextMemAllocated(CurrentMemoryContext, true) / (1024 * 1024));
+#endif
+
+		/* Clean up if we allocated a new value */
+		if (value != scan->orderByData->sk_argument)
+			pfree(DatumGetPointer(value));
 	}
 
-	while (!tuplesort_gettupleslot(so->sortstate, true, false, so->mslot, NULL))
+	if (tuplesort_gettupleslot(so->sortstate, true, false, so->mslot, NULL))
 	{
-		if (so->currentIndex == so->maxProbes)
-			return false;
+		bool		isnull;
+		ItemPointer heaptid = (ItemPointer) DatumGetPointer(slot_getattr(so->mslot, 2, &isnull));
 
-		IvfflatBench("GetScanItems", GetScanItems(scan, so->value));
+		scan->xs_heaptid = *heaptid;
+		scan->xs_recheck = false;
+		scan->xs_recheckorderby = false;
+		return true;
 	}
 
-	heaptid = (ItemPointer) DatumGetPointer(slot_getattr(so->mslot, 2, &isnull));
-
-	scan->xs_heaptid = *heaptid;
-	scan->xs_recheck = false;
-	scan->xs_recheckorderby = false;
-	return true;
+	return false;
 }
 
 /*
@@ -397,7 +374,6 @@ ivfflatendscan(IndexScanDesc scan)
 	IvfflatScanOpaque so = (IvfflatScanOpaque) scan->opaque;
 
 	pairingheap_free(so->listQueue);
-	pfree(so->startPages);
 	tuplesort_end(so->sortstate);
 	FreeAccessStrategy(so->bas);
 	FreeTupleDesc(so->tupdesc);

src/vector.c

@@ -155,24 +155,6 @@ CheckStateArray(ArrayType *statearray, const char *caller)
 	return (float8 *) ARR_DATA_PTR(statearray);
 }
 
-#if PG_VERSION_NUM < 120003
-static pg_noinline void
-float_overflow_error(void)
-{
-	ereport(ERROR,
-			(errcode(ERRCODE_NUMERIC_VALUE_OUT_OF_RANGE),
-			 errmsg("value out of range: overflow")));
-}
-
-static pg_noinline void
-float_underflow_error(void)
-{
-	ereport(ERROR,
-			(errcode(ERRCODE_NUMERIC_VALUE_OUT_OF_RANGE),
-			 errmsg("value out of range: underflow")));
-}
-#endif
-
 /*
  * Convert textual representation to internal representation
  */

test/t/009_ivfflat_filtering.pl

@@ -94,8 +94,7 @@ like($explain, qr/Seq Scan/);
 $explain = $node->safe_psql("postgres", qq(
 	EXPLAIN ANALYZE SELECT i FROM tst WHERE v <-> '$query' < 1 ORDER BY v <-> '$query';
 ));
-# TODO Do not use index
-like($explain, qr/Index Scan using idx/);
+like($explain, qr/Seq Scan/);
 
 # Test attribute index
 $node->safe_psql("postgres", "CREATE INDEX attribute_idx ON tst (c);");
@@ -110,7 +109,6 @@ $node->safe_psql("postgres", "CREATE INDEX partial_idx ON tst USING ivfflat (v v
 $explain = $node->safe_psql("postgres", qq(
 	EXPLAIN ANALYZE SELECT i FROM tst WHERE c = $c ORDER BY v <-> '$query' LIMIT $limit;
 ));
-# TODO Use partial index
-like($explain, qr/Index Scan using idx/);
+like($explain, qr/Index Scan using partial_idx/);
 
 done_testing();

test/t/017_hnsw_filtering.pl

@@ -18,9 +18,13 @@ $node->start;
 # Create table and index
 $node->safe_psql("postgres", "CREATE EXTENSION vector;");
 $node->safe_psql("postgres", "CREATE TABLE tst (i int4, v vector($dim), c int4, t text);");
+$node->safe_psql("postgres", "CREATE TABLE cat (i int4 PRIMARY KEY, t text, b boolean);");
 $node->safe_psql("postgres",
 	"INSERT INTO tst SELECT i, ARRAY[$array_sql], i % $nc, 'test ' || i FROM generate_series(1, 10000) i;"
 );
+$node->safe_psql("postgres",
+	"INSERT INTO cat SELECT i, 'cat ' || i, i % 5 = 0 FROM generate_series(1, $nc) i;"
+);
 $node->safe_psql("postgres", "CREATE INDEX idx ON tst USING hnsw (v vector_l2_ops);");
 $node->safe_psql("postgres", "ANALYZE tst;");
 
@@ -37,8 +41,7 @@ my $c = int(rand() * $nc);
 my $explain = $node->safe_psql("postgres", qq(
 	EXPLAIN ANALYZE SELECT i FROM tst WHERE c = $c ORDER BY v <-> '$query' LIMIT $limit;
 ));
-# TODO Do not use index
-like($explain, qr/Index Scan using idx/);
+like($explain, qr/Seq Scan/);
 
 # Test attribute filtering with few rows removed
 $explain = $node->safe_psql("postgres", qq(
@@ -56,8 +59,7 @@ like($explain, qr/Index Scan using idx/);
 $explain = $node->safe_psql("postgres", qq(
 	EXPLAIN ANALYZE SELECT i FROM tst WHERE c < 1 ORDER BY v <-> '$query' LIMIT $limit;
 ));
-# TODO Do not use index
-like($explain, qr/Index Scan using idx/);
+like($explain, qr/Seq Scan/);
 
 # Test attribute filtering with few rows removed like
 $explain = $node->safe_psql("postgres", qq(
@@ -96,13 +98,25 @@ $explain = $node->safe_psql("postgres", qq(
 ));
 like($explain, qr/Seq Scan/);
 
+# Test join
+$explain = $node->safe_psql("postgres", qq(
+	EXPLAIN ANALYZE SELECT cat.t FROM cat INNER JOIN tst ON cat.i = tst.c ORDER BY v <-> '$query' LIMIT $limit;
+));
+like($explain, qr/Index Scan using idx/);
+
+# Test join with attribute filtering
+$explain = $node->safe_psql("postgres", qq(
+	EXPLAIN ANALYZE SELECT cat.t FROM cat INNER JOIN tst ON cat.i = tst.c WHERE cat.b = 't' ORDER BY v <-> '$query' LIMIT $limit;
+));
+like($explain, qr/Index Scan using idx/);
+
 # Test attribute index
 $node->safe_psql("postgres", "CREATE INDEX attribute_idx ON tst (c);");
 $explain = $node->safe_psql("postgres", qq(
 	EXPLAIN ANALYZE SELECT i FROM tst WHERE c = $c ORDER BY v <-> '$query' LIMIT $limit;
 ));
-# TODO Use attribute index
-like($explain, qr/Index Scan using idx/);
+# Use attribute index
+like($explain, qr/Bitmap Index Scan on attribute_idx/);
 
 # Test partial index
 $node->safe_psql("postgres", "CREATE INDEX partial_idx ON tst USING hnsw (v vector_l2_ops) WHERE (c = $c);");

test/t/039_hnsw_cost.pl

@@ -0,0 +1,60 @@
+use strict;
+use warnings FATAL => 'all';
+use PostgreSQL::Test::Cluster;
+use PostgreSQL::Test::Utils;
+use Test::More;
+
+my @dims = (384, 1536);
+my $limit = 10;
+
+# Initialize node
+my $node = PostgreSQL::Test::Cluster->new('node');
+$node->init;
+$node->start;
+
+$node->safe_psql("postgres", "CREATE EXTENSION vector;");
+
+for my $dim (@dims)
+{
+	my $array_sql = join(",", ('random()') x $dim);
+
+	# Create table and index
+	$node->safe_psql("postgres", "CREATE TABLE tst (i int4, v vector($dim));");
+	$node->safe_psql("postgres",
+		"INSERT INTO tst SELECT i, ARRAY[$array_sql] FROM generate_series(1, 2000) i;"
+	);
+	$node->safe_psql("postgres", "CREATE INDEX idx ON tst USING hnsw (v vector_l2_ops);");
+	$node->safe_psql("postgres", "ANALYZE tst;");
+
+	# Generate query
+	my @r = ();
+	for (1 .. $dim)
+	{
+		push(@r, rand());
+	}
+	my $query = "[" . join(",", @r) . "]";
+
+	my $explain = $node->safe_psql("postgres", qq(
+		EXPLAIN ANALYZE SELECT i FROM tst ORDER BY v <-> '$query' LIMIT $limit;
+	));
+	like($explain, qr/Index Scan using idx/);
+
+	# 3x the rows are needed for distance filters
+	# since the planner uses DEFAULT_INEQ_SEL for the selectivity (should be 1)
+	# Recreate index for performance
+	$node->safe_psql("postgres", "DROP INDEX idx;");
+	$node->safe_psql("postgres",
+		"INSERT INTO tst SELECT i, ARRAY[$array_sql] FROM generate_series(2001, 6000) i;"
+	);
+	$node->safe_psql("postgres", "CREATE INDEX idx ON tst USING hnsw (v vector_l2_ops);");
+	$node->safe_psql("postgres", "ANALYZE tst;");
+
+	$explain = $node->safe_psql("postgres", qq(
+		EXPLAIN ANALYZE SELECT i FROM tst WHERE v <-> '$query' < 1 ORDER BY v <-> '$query' LIMIT $limit;
+	));
+	like($explain, qr/Index Scan using idx/);
+
+	$node->safe_psql("postgres", "DROP TABLE tst;");
+}
+
+done_testing();

test/t/039_ivfflat_streaming.pl

@@ -1,31 +0,0 @@
-use strict;
-use warnings FATAL => 'all';
-use PostgreSQL::Test::Cluster;
-use PostgreSQL::Test::Utils;
-use Test::More;
-
-my $dim = 3;
-my $array_sql = join(",", ('random()') x $dim);
-
-# Initialize node
-my $node = PostgreSQL::Test::Cluster->new('node');
-$node->init;
-$node->start;
-
-# Create table
-$node->safe_psql("postgres", "CREATE EXTENSION vector;");
-$node->safe_psql("postgres", "CREATE TABLE tst (i int4, v vector($dim));");
-$node->safe_psql("postgres",
-	"INSERT INTO tst SELECT i, ARRAY[$array_sql] FROM generate_series(1, 100000) i;"
-);
-$node->safe_psql("postgres", "CREATE INDEX ON tst USING ivfflat (v vector_l2_ops);");
-
-my $count = $node->safe_psql("postgres", qq(
-	SET enable_seqscan = off;
-	SET ivfflat.probes = 10;
-	SET ivfflat.streaming = on;
-	SELECT COUNT(*) FROM (SELECT v FROM tst WHERE i % 10000 = 0 ORDER BY v <-> (SELECT v FROM tst LIMIT 1) LIMIT 11) t;
-));
-is($count, 10);
-
-done_testing();

test/t/040_ivfflat_cost.pl

@@ -0,0 +1,50 @@
+use strict;
+use warnings FATAL => 'all';
+use PostgreSQL::Test::Cluster;
+use PostgreSQL::Test::Utils;
+use Test::More;
+
+my @dims = (384, 1536);
+my $limit = 10;
+
+# Initialize node
+my $node = PostgreSQL::Test::Cluster->new('node');
+$node->init;
+$node->start;
+
+$node->safe_psql("postgres", "CREATE EXTENSION vector;");
+
+for my $dim (@dims)
+{
+	my $array_sql = join(",", ('random()') x $dim);
+
+	# Create table and index
+	$node->safe_psql("postgres", "CREATE TABLE tst (i int4, v vector($dim));");
+	$node->safe_psql("postgres",
+		"INSERT INTO tst SELECT i, ARRAY[$array_sql] FROM generate_series(1, 5000) i;"
+	);
+	$node->safe_psql("postgres", "CREATE INDEX idx ON tst USING ivfflat (v vector_l2_ops) WITH (lists = 5);");
+	$node->safe_psql("postgres", "ANALYZE tst;");
+
+	# Generate query
+	my @r = ();
+	for (1 .. $dim)
+	{
+		push(@r, rand());
+	}
+	my $query = "[" . join(",", @r) . "]";
+
+	my $explain = $node->safe_psql("postgres", qq(
+		EXPLAIN ANALYZE SELECT i FROM tst ORDER BY v <-> '$query' LIMIT $limit;
+	));
+	like($explain, qr/Index Scan using idx/);
+
+	$explain = $node->safe_psql("postgres", qq(
+		EXPLAIN ANALYZE SELECT i FROM tst WHERE v <-> '$query' < 1 ORDER BY v <-> '$query' LIMIT $limit;
+	));
+	like($explain, qr/Index Scan using idx/);
+
+	$node->safe_psql("postgres", "DROP TABLE tst;");
+}
+
+done_testing();

test/t/040_ivfflat_streaming_recall.pl

@@ -1,125 +0,0 @@
-use strict;
-use warnings FATAL => 'all';
-use PostgreSQL::Test::Cluster;
-use PostgreSQL::Test::Utils;
-use Test::More;
-
-my $node;
-my @queries = ();
-my @expected;
-my $limit = 20;
-my @cs = (100, 1000);
-
-sub test_recall
-{
-	my ($c, $probes, $min, $operator) = @_;
-	my $correct = 0;
-	my $total = 0;
-
-	my $explain = $node->safe_psql("postgres", qq(
-		SET enable_seqscan = off;
-		SET ivfflat.probes = $probes;
-		SET ivfflat.streaming = on;
-		EXPLAIN ANALYZE SELECT i FROM tst WHERE i % $c = 0 ORDER BY v $operator '$queries[0]' LIMIT $limit;
-	));
-	like($explain, qr/Index Scan using idx on tst/);
-
-	for my $i (0 .. $#queries)
-	{
-		my $actual = $node->safe_psql("postgres", qq(
-			SET enable_seqscan = off;
-			SET ivfflat.probes = $probes;
-			SET ivfflat.streaming = on;
-			SELECT i FROM tst WHERE i % $c = 0 ORDER BY v $operator '$queries[$i]' LIMIT $limit;
-		));
-		my @actual_ids = split("\n", $actual);
-
-		my @expected_ids = split("\n", $expected[$i]);
-		my %expected_set = map { $_ => 1 } @expected_ids;
-
-		foreach (@actual_ids)
-		{
-			if (exists($expected_set{$_}))
-			{
-				$correct++;
-			}
-		}
-
-		$total += $limit;
-	}
-
-	cmp_ok($correct / $total, ">=", $min, $operator);
-}
-
-# Initialize node
-$node = PostgreSQL::Test::Cluster->new('node');
-$node->init;
-$node->start;
-
-# Create table
-$node->safe_psql("postgres", "CREATE EXTENSION vector;");
-$node->safe_psql("postgres", "CREATE TABLE tst (i int4, v vector(3));");
-$node->safe_psql("postgres",
-	"INSERT INTO tst SELECT i, ARRAY[random(), random(), random()] FROM generate_series(1, 100000) i;"
-);
-
-# Generate queries
-for (1 .. 20)
-{
-	my $r1 = rand();
-	my $r2 = rand();
-	my $r3 = rand();
-	push(@queries, "[$r1,$r2,$r3]");
-}
-
-# Check each index type
-my @operators = ("<->", "<=>");
-my @opclasses = ("vector_l2_ops", "vector_cosine_ops");
-
-for my $i (0 .. $#operators)
-{
-	my $operator = $operators[$i];
-	my $opclass = $opclasses[$i];
-
-	$node->safe_psql("postgres", "CREATE INDEX idx ON tst USING ivfflat (v $opclass);");
-
-	foreach (@cs)
-	{
-		my $c = $_;
-
-		# Get exact results
-		@expected = ();
-		foreach (@queries)
-		{
-			my $res = $node->safe_psql("postgres", qq(
-				SET enable_indexscan = off;
-				WITH top AS (
-					SELECT v $operator '$_' AS distance FROM tst WHERE i % $c = 0 ORDER BY distance LIMIT $limit
-				)
-				SELECT i FROM tst WHERE (v $operator '$_') <= (SELECT MAX(distance) FROM top)
-			));
-			push(@expected, $res);
-		}
-
-		if ($c == 100)
-		{
-			test_recall($c, 1, 0.58, $operator);
-			test_recall($c, 10, 0.98, $operator);
-		}
-		else
-		{
-			if ($operator eq "<->")
-			{
-				test_recall($c, 1, 0.80, $operator);
-			}
-			else
-			{
-				test_recall($c, 1, 0.88, $operator);
-			}
-		}
-	}
-
-	$node->safe_psql("postgres", "DROP INDEX idx;");
-}
-
-done_testing();